- Your Account
CM95 Mulcher Chipper Honda GX390
Price range: $5,150.00 through $5,795.00
This is the bigger version of the CM90 Mulcher Chipper
The Truyard CM95390 Mulcher Chipper has a massive feed hopper and can process large amounts of garden rubbish quickly and easily. The Truyard CM95390 Mulcher Chipper has an even bigger flywheel with a massive 40 mulcher blades, which are reversible. Large amounts of garden rubbish can be processed quickly and easily. Through the side chipper the large GX390 Honda Engine drives two chipper blades to reduce branches up to 95mm to fine mulch.
Watch The CM95 In Action
Features
- Mulch big branches up to 95mm (approximately 4 inches).
- Reduces material to a fine mulch.
- Large hopper lets you feed huge amounts of prunings in a very short time.
- All steel construction for durability.
- Powder coated finish to prevent rust.
- 2 Year domestic warranty, 3 month commercial warranty
Specifications
| Engine | Honda GX390. |
| Chipping Capacity | Dual hardened high carbon steel hipper blades. Chips up to 95mm. |
| Mulching Technology | 40 spring steel reversible hammers on a balanced flywheel with heat treated blade spindles. |
| Chassis | Steel construction. |
| Transmission | V Belt B section with centrifugal clutch and cast iron pulley's. |
| Weight | 160kg |
Additional information
| Weight | 160 kg |
|---|---|
| Engine | Honda |
| Start Type | Key-Start, Pull-Start |
1 review for CM95 Mulcher Chipper Honda GX390
You must be logged in to post a review.
How much does the CM90 mulcher/chipper weigh?
- The CM90 machine with either the Briggs & Stratton or Honda engine weighs approximately 170kg.
How tall is the CM90?
- The CM90 is approximately 1220mm tall.
What is the best way to transport the CM90?
- The CM90 is best transported by being tied in a trailer or the back of a ute.
Michael –
I purchased a Recycler 4000 (re branded as Truyard CM95, back in 2010. This product is not the cheapest on the market. But i have been able to use this chipper mulcher for greater than 16 years of fairly constant usage. Over this time i have only done regular servicing (Briggs + Stratton 14hp Vanguard electric start engine), oil/filters,plugs, battery etc all still easily available. And sharpening chipper blades (×2), of which i have 2 pairs. I cannot recommend and rate this product highly enough. I cannot see anything that will stop it keeping on going, possibly beyond my life time. For sure to operate it you do need PPE and use OHS care practices as it is an industrial grade machine. Regarding ROI the longer i keep using it the less per hour it costs me. So I did have concerns about the up front cost compared to other products, but i seriously doubt the others would still be running or have parts support afyer16 years.